4' Wide x 8' High x 5/32" Thick Unfinished Maple Veneer Decorative Tambour Sheet with 1/2" - 30 Degree Grooves

Hover over image to zoom in

Shown in Unfinished Red Oak Veneer

SKU: 231-A-MP

Maple wood veneer with MDF/hardwood core.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 2” minimum radius.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour do...

Maple wood veneer with MDF/hardwood core.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 2” minimum radius.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Panel size is true 8 ft. (96 in.) high x 4 ft. wide x 5/32 in. thick.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood veneer is ready to stain, paint or clear coat.
Easier to work with than typical wall cladding. To install, simply apply construction adhesive to the flexible paper backer and mount tambour sheet to your surface.
Made in the USA.

$205.00

Step 1 - Select Species

Species: Maple